What is the philosophy of Process Control (rather than Product Control)?
Process Control is proactive rather than reactive. The key elements of process control are outlined in this article.
What is Quality?
Ask people involved with the design and manufacture of a product the following question: “What is Quality?” Many, if not most, of the responses will be some form of the following: “Quality is ensuring that our products meet the customer (or engineering) specifications.” Unfortunately, this leads to a “conformance to specifications” or a “Product Control” approach to quality.
Controlling the product means that the product (incoming or outgoing) is inspected to ensure that all product conforms to the stated specifications. Several problems exist with this approach:
WinSPC Means Lower Costs and Higher Quality
WinSPC is software to help manufacturers create the highest quality product for the lowest possible cost. You can learn more here.
* The only time we react is when the product is out-of-specification. By this time, we may have a major crisis on our hands. The product is unusable and must be scrapped, reworked, or downgraded. Product control is reactive. In other words, we allow the process to control us.
* Inspection does not distinguish between parts that are very close to target vs. parts that are nearly out of specification — all are treated as “good”. However, almost always our customers would prefer to receive parts close to target.
* Inspection does not inherently monitor the evolution of the process over time. When a problem occurs, no data is available to support the determination of root cause(s).
* Inspection systems (people and equipment) make errors. “Good” parts may be rejected and “bad” parts may be accepted.
On the other hand, Process Control is proactive rather than reactive. Key elements of process control follow below:
* By first monitoring a process for a period of time, we learn what to expect from the process (with regard to key characteristics such as the process average and amount of process variation).
* Once we know what to expect under normal circumstances, we can detect when significant changes to the process occur.
* We then react to the observed change, determine the root cause(s) of the process change, and act to prevent future occurrences. Note that we typically will react long before we produce non-conforming product and crises may be averted. Furthermore, since we identify when the process change occurs we have a much better chance of identifying the root cause quickly.
Moving Upstream in the Process
Process control is even more beneficial when we move upstream in the process. When the significant process variables that affect a key process output are being controlled, then the process output is predictable. Costly (and imperfect) inspection may be eliminated.
It is curious that most customers demand process capability studies from their suppliers but few insist on evidence of process stability — which is required before properly assessing capability.
Of course, to consistently achieve desired process outputs by controlling the relevant inputs, those relevant inputs must be determined by developing process understanding. Statistical methods such as Design of Experiments and Regression Analysis are invaluable for this task.
Back to Quality
Two definitions of Quality that are consistent with a process control philosophy are:
* Quality is closeness to target.
* Quality is minimizing variation.
With these definitions, quality may be objectively measured. When variability in important product characteristics is reduced, the quality improves. Customers know what to expect and product performance is consistent! Only a process control focus allows us to minimize variation by detecting and eliminating root causes of process changes.
Steven Wachs, Principal Statistician
Integral Concepts, Inc.
Integral Concepts provides consulting services and training in the application of quantitative methods to understand, predict, and optimize product designs, manufacturing operations, and product reliability. www.integral-concepts.com
**
Download the white paper on how to jump-start a “mini” Six Sigma Quality program on a budget**
Grace Barton
Marketing Specialist
About the Author Latest Posts
Grace Barton is a digital marketing and competitive intelligence professional who crafts strategic narratives by bridging marketing insights with analytical expertise. At Advantive, she creates engaging, data-driven content tailored to the distribution, manufacturing, packaging, and quality industries. Her goal is to deliver impactful messaging that drives engagement and growth based on specific gap closure needs, whether responding to sales organization requirements, pinpointing gaps in content, or meeting immediate market trends.
She thrives on transforming competitive intelligence into actionable insights for the sales organization. Grace manages Advantive’s competitive intelligence platform, Klue, to equip the sales team with the battlecards and market data they need to stay ahead of competitors. Since launch, she’s built 28+ battlecards across four lines of business, ensuring the GTM strategy stays sharp.
Grace has a passion for leveraging market insights with storytelling to guide strategic decision-making, empower sales organizations, and nurture organizational growth.
Areas of Expertise: Digital Marketing, Competitive Intelligence, Strategic Narratives, Marketing Insights, Analytical Expertise
- Why Scheduling is Still the Hidden Lever in Corrugated Packaging May 14, 2026
- From Data to Decisions: What AI Could Unlock Inside Your ERP April 30, 2026
- From Data to Direction: Why Advantive ONE Signals a New Era of Industrial AI April 14, 2026
- When the Warehouse Becomes the Bottleneck April 9, 2026
- The Power of Virtual Assistants When They’re Built for Real Work February 3, 2026